Product DescriptionWant ABS Transparent Case? Please skip Description: This is a 2017 New ABS Case for Raspberry Pi Zero W, and it's also compatible with Raspberry Pi Zero. Note: Raspberry Pi Zero / Zero W Board is not included. Package Included: 1 x ABS Case 1 x Install Screws Pack..

Product DescriptionFeature: Operating voltage: 3V Receiving frequency: 535-1620KHZ Power: 0.5W Note: This kit does not supply any instructions, please note about this before you order it. Requires a certain amount of knowledge to manually install electronic components. Package includes: 5 x AM Radio DIY Electronic Kit..

Product DescriptionDescription: OPS-1 light control switch has two trigger modes and two output modes: 1). Set trigger mode by JMP1: Light trigger mode (1-3): When the photosensitive resistance induction to the outside light from the matt to light or light gradually increased, the relay pull. Dark trigger mode (2-4): When the photosensitive resista..

Product DescriptionDescriptions: Perfect for Arduino Shield Prototyping and Testing Plastic housing, metal contact clips Accept wire with diameter 20-29AWG Volatge/current: 300V/3-5A 400 tie-point 2 Power Lanes, Tie-point 100 1 Double-strip, Tie-point 300 Solderless Breadboard Size: 82x55x8.5mm Package included: 1 x Arduino Uno R3 Development Board..

Product DescriptionNote: Package does not includes the housing. Feature: New design concept, new innovative design Single chip driver 16×9 or 16×8 dot matrix combinations Support infrared remote control Support animation acceleration and deceleration, spectrum sensitivity adjustment, animation support suspension Chip: STC12C5A60S2 Specifi..

Product DescriptionFeatures: 1. With switch ON/OFF, easy to turn on or turn off 2. Can load power at DC 5V/2A stably 3. USB / Micro USB interface 4. Perfectly matched to Raspberry PI or Banana Pi 5. Wire is made of copper 6. Wrapping is made of PVC Specifications: Length: 150cm Wire size: 3.4mm in diameter Net weight: 40g N..

Product DescriptionFeature: This kit is designed for SMD soldering practice only. No need manual, put the right element to the right position as follow. Battery: 3*AA battery (package does not includes) Soldering Note: SMD components are relatively small, please note that do not lose, light-emitting diodes, diodes, chips have direction, pay attenti..

Product DescriptionFeature:This cable generally use for LED screen, because it integrated cross flow plate, so you do not need to buy high pressure article lampThis cable is generally used for small screens and other 10.1/15.6/14/14.1,etc Inch LEDVoltage: 3.3VHole distance: 0.5mmCable length: 250mmSuitable for: 40 Pin 1 Channel 6 Bit LCDPackage inc..

Product DescriptionDescriptions: This camera cable is specifically designed to work with the Raspberry Pi Zero – Version 1.3! Just plug it into your Pi Zero's camera port and then the other end into one of the official Pi Cameras or other Pi Cameras for photo & video joy. Specifications: Material:Copper plating Color: Gold Size: 16 x ..

Product DescriptionDescription: High quality kit for Arduino Beginners, with Uno R3 board. This Uno R3 board is a complete clone of Arduino Uno R3. With some interesting electronic modules, you can gain interest from the learning process. With some discrete components, like resistors, LEDs, buzzers,infrared receivers and so on. Packing: Carton pack..

Product DescriptionFeatures: - Input Voltage: AC 100-240V 50/60Hz – Output: DC 5.0V 2500mA (2.5A) – Cable Length: Approx.110 cm – Short Circuit Protection – Overload Protection – Consistent fixed switching voltage – Internal Fuse for Extra Safety – With Power Switch, Easy to turn on and off – Weight: ..

Product DescriptionFeature: Long: 5M Pin number: 20 Pin Material: Tinned copper wire Pitch: 1.27mm, suitable for 2.54mm FC plugs and horn Package included: 5 x 5M 20P DuPont Cable..

Product DescriptionFeatures: - Input Voltage: AC 100-240V 50/60Hz – Output: DC 5.0V 2500mA (2.5A) – Cable Length: Approx.110 cm – Short Circuit Protection – Overload Protection – Consistent fixed switching voltage – Internal Fuse for Extra Safety – With Power Switch, Easy to turn on and off – Weight: ..

Product DescriptionFeatures: 1. With switch ON/OFF, easy to turn on or turn off 2. Can load power at DC 5V/2A stably 3. USB / Micro USB interface 4. Perfectly matched to Raspberry PI or Banana Pi 5. Wire is made of copper 6. Wrapping is made of PVC Specifications: Length: 150cm Wire size: 3.4mm in diameter Net weight: 40g N..

Product DescriptionFeature: Long: 5M Pin number: 20 Pin Material: Tinned copper wire Pitch: 1.27mm, suitable for 2.54mm FC plugs and horn Package included: 3 x 5M 20P DuPont Cable..