Product Description Notes: Orange Pi requires a memory card beyond 8g, class10 Package included: 1 x Orange Pi Zero Plus..

Product Description1. High-quality FR-4 and plastic material, very durable 2. Working Current: DC 3.3V / 13 – 25mA 3. Idle Current: DC 3.3V / 10 – 13mA 4. Sleep Current: less than 80uA 5. Peak Current: less than 50mA 6. Working Frequency: 13.56MHz 7. Support Cards: MIFARE1 S50, MIFARE1 S70, MIFARE Ultralight, MIFARE Pro etc. 8. Applic..

Product Description Features: 1. Compatible with Raspberry Pi Zero. 2. Mini-HDMI to HDMI adapter, you could use this to connect the HDMI screen display devices. 3. Micro USB to USB Female cable ,it could read USB interface storage devices. Specifications: Fit for Raspberry Pi Zero Notes: The screen does not included. Package Included: 1 x ..

Product DescriptionMain Features: 1. Material: FR4 2. Color: red, yellow 3. Data type: analog signal 4. Interface type: PH 2.5 – 3P 5. Application: DIY project 6. Mainly Compatible with: ArduinoSpecification: General Types Keyboard Module Size 8.0*4.0*2.0 cm ..

Product Description1. Voltage: DC 2.5-5.5V. 2. Output Power: 3W + 3W (at 4 ohm). 3. Noise ratio: 90dB. 4. Efficiency: more than 90 percent. 5. 2 channels 3W amplifier with PAM8403. 6. Output is CMOS BTL driver. 7. Cannot change any component parameters to protect IC. 8. The board can also be powered by 5V USB power supply or 4 x 1.5V battery. 9. I..

Product Description Description:   Onboard 8P-chip carrier, can support AT24C256 series chips; Pin power supply, on-board power indicator; on-board pull-up resistor for I2C communications required ; All pins leads out and be marked, the address input and the write-protect pin direct jumper settings; PCB board size: 36.5 (mm) x12 (mm) &..

Product Description1.The kit is very suitable for enthusiasts to make their own Arduino board. 2. With the help of the soldering tutorial, the soldering is easy and convenient. 3. You can use the Arduino official board to burn bootloader of this board. 4. It uses a locking seat, so it is easy to replace the chip. 5. You can use FT232 USB to TTL mod..

Product Description1. Speaker resistance: 4-8ohms, recommended: 4ohms 2. Speaker power: 2-8W 3. Can use the computer USB port 5V power supply or using a mobile phone charger USB port 5V power supply, battery power can also be used 4. High efficiency: 90 percent, provide 3W (left channel) + 3W (right channel) output power under 4ohm load and 5V po..

Product Description Description:   Onboard 8P-chip carrier, can support AT24C256 series chips; Pin power supply, on-board power indicator; on-board pull-up resistor for I2C communications required ; All pins leads out and be marked, the address input and the write-protect pin direct jumper settings; PCB board size: 36.5 (mm) x12 (mm) &..

Product Description If you don't know how to connect this dimmer to a light, here is the wiring instruction:  Specification: Material: plastic Color: black AC: 220V 50Hz MAX power: 150W 3 levels: low, medium, high, then off Size: 4.5 x 3.5 x 1.5cm ( L x W x H ) Cable length: about 9cm Feature: CE approval Note: connec..

Product Description1. Chip: MAX3232CSE 2. Voltage range: 3 v to 5 v 3. The highest baud rate : not recommended More than 120 KBPS 4. A converter board for electrical levels Specification: General Size 1.6*1cm Package Weight One Package Weight 0.02kgs / 0.05lb Qty per Carton 3..

Product Description Description:   Onboard 8P-chip carrier, can support AT24C256 series chips; Pin power supply, on-board power indicator; on-board pull-up resistor for I2C communications required ; All pins leads out and be marked, the address input and the write-protect pin direct jumper settings; PCB board size: 36.5 (mm) x12 (mm) &..

Product Description1. Input voltage: 10 – 32V, output voltage: 12 – 35V ( adjustable ) 2. Output current: 10A ( max. ) 3. Provide power for your electronic equipment 4. The output voltage can not below the input voltageSpecification: General Size 6.5*4.7*2.5cm Weight ..

Product DescriptionDescription: The X920 expansion board is suitable for Raspberry Pi 3 Model B / 2B / B+/ A+ / Zero W DAC All-function with PCM5122 chip Operating System: All Raspberry Pi operating systems Support the mainstream music player, such as Volumio, RuneAudio, OSMC, XMBC(Kodi), MOODE etc. Features: - Full HD audio – up to 24-bit/1..

Product Description If you don't know how to connect this dimmer to a light, here is the wiring instruction:  Specification: Material: plastic Color: black AC: 220V 50Hz MAX power: 150W 3 levels: low, medium, high, then off Size: 4.5 x 3.5 x 1.5cm ( L x W x H ) Cable length: about 9cm Feature: CE approval Note: connec..