Product Description1. Simple and easy 2. Working Voltage: 3.3V 3. Antenna Type: built-in PCB antenna 4. Wireless Network mode: station / soft AP / soft AP and station 5. Wireless Criteria: 802.11 b / g / n 6. It is very easy to develop projects with AT command 7. Suitable for DIY enthusiastsSpecification: General Model ..

Product Description1. Working torque: 1.6KG/cm 2. Response rotary speed: 0.10s / 60 degree 3. Working temperature: -30 – 60 degree 4. Dead zone: 2ms 5. Rotating angle: Maximum 180 degrees 6. Working voltage: 3.5 – 6V 7. It can match ultrasonic wave, IR sensor, camera and other detectors 8. This kind of smart camera cradle head can bu us..

Product Description1. It is a small, simple IC for embedding audio-playback into your next project. 2. Simply load your audio files onto a micro-SD card and plug it in. 3. Low-cost module for all embedded Audio-Sound applications. 4. On-board micro-SD memory card adaptor for storing of audio, voice and music files.Specification: General Model..

Product Description1. Adopts 8-digit LED common anode circuit, input low-level signal, and light will be on 2.Power supply voltage: DC 3 – 6V 3. With LED indicator, when power on, green light will be on 4. Adopts 330 ohm resistance for current limiting to prevent LED from damage 5. Can be made in different light modes through the control of ..

Product DescriptionSpecification: General Material Plastic, Metal Package Weight One Package Weight 0.02kgs / 0.05lb Qty per Carton 500 Carton Weight 9.00kgs / 19.84lb Carton Size 32cm * 32cm * 30cm / 12.6inch * 12.6inch * 11.81inch..

Product Description1. This case is specifically designed for Raspberry pi 3. 2. The shell is made up of 9 layers acrylic boards and has different ports and button position. 3. It have many ventilation ports in side and covering, good heat dispersion. 4. Special design to install a cooling fan. 5. The cooling fan helps to exhaust the hot air from ..

Product Description1. LDTR – PJ010 experimental platform includes a breadboard for prototyping making. This a nice and full-on prototyping platform for you and your Pi Zero.Specification: General Model LDTR – PJ010 Size 12*6.5*1cm Weigh..

Product Description1. Resistance range: 100 ohm – 10K ohm. 2. It is widely used to adjust timer, speed, temperature. 3. For MCU experiment.Specification: General Model WXD3 – 13 – 2W Size 5.7*2.6*2 cm Weight ..

Product Description1. This case is specifically designed for Raspberry pi 3. 2. The shell is made up of 9 layers acrylic boards and has different ports and button position. 3. It have many ventilation ports in side and covering, good heat dispersion. 4. Special design to install a cooling fan (Not included).Specification: General Model ..

Product Description1. With 7 color light, port V connected to VCC or constant high-level signal 2. Connecting one of R, G, B ports to low level signal can select one light color 3. More light mode and color can be made through control of Arduino, SCM, and Raspberry Pi 4. Easy operationSpecification: General Model LDT..

Product Description1.High quality material . 2.Easy to use ,suitable for DIY Enthusiasts . Specification: Package Weight One Package Weight 0.04kgs / 0.09lb Qty per Carton 200 Carton Weight 7.20kgs / 15.87lb Carton Size 40cm * 30cm * 20cm / 15.75inch * 11.81inch * 7.87inch..

Product Description1. 5 million pixels camera. 2. Support 1080P resolution. 3. Static picture resolution is 2592 x 1944. 4. Support 1080P 30, 720P 60 and 640x480P 60 / 90 video recording. 5. The product is used for Raspberry Pi 3 / 2 / B+.Specification: General Resolution 1080p Sensor ..

Product Description1. Support PWM / interrupt / serial / I2C scalable GPIO 2. The firmware update can be customized by expansion board 3. Without USB to TTL converter 4. A key to enter the brush write mode, without any wiring 5. Standard pin interface to achieve full compatibility with the pitch Uno, Mega and so on 6. 3.3V power supply using ad..

Product Description1. 5 million pixels mini camera. 2. Support 1080P resolution. 3. Static picture resolution is 2592 x 1944. 4. Support 1080P 30, 720P 60 and 640x480P 60 / 90 video recording.Specification: General Model C0733 Size 60×11.5x5mm ..

Product Description1. Made of durable ABS, long durability. 2. Lightweight design, convenient to install and use. 3. Effectively protects the device from overheating with many air vents. 4. Designed for Raspberry Pi Zero W / Zero.Specification: General Material ABS Receiver (Switch) Product..